Understanding The Status Indicators - Whirlpool 920 Series Use And Care Manual

SETTING THE CONTROLS

Understanding the status indicators

Washing
The Washing indicator glows at the start of
WASHING
Water Heating
The Water Heating indicator glows when-
WATER WATER
HEATING
Rinsing
The Rinsing indicator glows during the last
RINSING
Drying
The Drying indicator glows during the
DRYING
cycle. If dishes are not as dry as you ex-
pected when using Air Dry, either allow
longer drying times (overnight) or do not
use Air Dry.
20
the first fill of any cycle
(except Rinse Only) and
remains on until the end
of the main wash.
ever water is heated
during a cycle.
two rinses of all cycles.
drying portion of each
cycle – even if you
select Air Dry. It turns
off at the end of the
Clean
The Clean indicator glows at the end of a
cycle to show that the
CLEAN
load is clean. All other
indicators turn off. The
Clean indicator glows until
you open the door or press Cancel/Drain or
any other control pad.
Controls Locked
The Controls Locked feature lets you lock
the control pads. When
CONTROLS CONTROLS
the controls are locked,
LOCKED
you cannot start the
dishwasher.
To lock controls:
• Press and hold Air Dry (about 5
seconds) until the Controls Locked
indicator glows.
AIR DRY AIR DRY
To unlock controls:
• Press and hold Air Dry (about 5 seconds)
until the Controls Locked indicator turns off.