Setting The Controls; Selecting A Wash Cycle - Whirlpool 900 Series Use And Care Manual

Operating your dishwasher's controls properly helps you obtain the best possible washing
results. This section tells you how to select wash cycles and options.
Selecting a wash cycle
Press a Cycle pad. NORMAL, LIGHT, and RINSE-WASH LATER cycles all share the same
pad. Turn the Cycle Control Knob to the desired cycle.
A "*" shows what each cycle includes
CYCLE
MAIN
FINAL
TIME
CYCLE
WASH RINSE WASH RINSE RINSE DRY (Minutes)
POTS-N-PANS
Double wash for
maximum cleaning
of cooked-on or
baked-on foods.
.t
.
et
.
Ott
.
76*
l
The water heats to 140°F (60°C)
in both washes (marked+).
l
The water heats to 140°F (60%) in
the final rinse (markedtt).
NORMAL
m
Double wash for
.
.- l
normal, everyday
soiled loads. (The
Energy Guide label
.
et
.
Ott
.
66*
is based on this cycle.)
l
Select HI-TEMP WASH to heat water
in the main wash (marked t).
l
The water heats to 140°F (60%) in
the final rinse (marked tt).
LIGHT
.
m
Single wash for
.
prerinsed or lightly
soiled loads.
l
Select HI-TEMP
WASH to heat water in the main
wash (markedt).
l
The water heats to 140°F (60°C) in
the final rinse (marked tt).
l t
.
Ott . 60'
12