Dip Switch Test; Dip Switch Settings Tables - Midway CRUIS'N USA Manual

Dip Switch Test

The DI P Switch Test allows the operator to check the location of the two 8-position DI P switches
on the CPU Board. The operator can also change the setting of each position of each DIP
Switch during this mode.
To enter the test, press the Vol�me Up or Down Switch to highlight the DI P Switch Test; then,
press the Test Mode Switch to activate. The screen displays a layout of their current settings.
To change a DI P Switch setting, move the switch to the desired setting, then check the screen
to verify that the switch now shows the new setting.
Press Test Mode Switch to return to the Diagnostic Menu.
NOT USED
MOTION OFF
MOTIN ON
UP RIGHT
SIT DOWN
NOT USED
LINK OFF
LINK ON
NOT USED
SLAVE
MASTER
COIN MODE
USA1
GERMAN1
FRENCH1
CANADA1
SWISS1
ITALY1
UK1
SPAIN1
AUSTRALIA1
JAPAN1
TAIWAN1
AUSTRIA1
BELGIUM1
CHILE1
MEXIC01
ARGENTINA1
SWEDEN1
FINLAND1
NETHERLAND1
NORWAY1
DENMARK1
HOLLAND1
Coin Counter Mode
One Counter
Two Counters
DIP Switch 2 Settings Table (U97)
SW1 SW2 SW3
OFF*
ON
OFF*
ON
OFF
ON*
DIP Switch 3 Settings Table (U19)
SW1 SW2 SW3
OFF OFF OFF
ON OFF OFF
OFF ON OFF
ON ON OFF
OFF OFF ON
ON OFF ON
ON
OFF ON
ON ON ON
OFF OFF OFF
ON OFF OFF
OFF ON OFF
ON ON OFF
OFF OFF ON
ON OFF ON
ON
OFF ON
ON ON ON
OFF OFF OFF
ON OFF OFF
OFF ON OFF
ON ON OFF
OFF OFF ON
ON OFF ON
1-11
sws
SW4 SW6 SW7
OFF* OFF*
ON ON
OFF*
ON
OFF*
ON
sws
SW4 SW6 SW7
OFF OFF OFF OFF
OFF OFF OFF OFF
OFF OFF OFF OFF
OFF OFF OFF OFF
OFF OFF OFF
OFF
OFF OFF OFF OFF
OFF OFF
OFF OFF
OFF OFF OFF OFF
ON OFF OFF OFF
ON OFF OFF OFF
ON OFF OFF OFF
ON OFF OFF OFF
ON OFF OFF OFF
ON OFF OFF OFF
OFF
ON OFF OFF
ON OFF OFF OFF
OFF ON OFF OFF
OFF ON OFF OFF
OFF ON OFF OFF
OFF ON OFF OFF
OFF ON OFF OFF
OFF ON OFF OFF
SW8
OFF*
ON
SW8
OFF*
ON