Sealey VS8233A Instructions

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
instruction
manual
1. SAfETy
1.1. GENERAL SAfETy
Always perform automotive testing in a safe environment.
9
Keep your work area clean and well lit.
9
Keep clothing, hair, hands, tools, test equipment, etc. away from all moving or hot engine parts.
9
Operate the tool in a well-ventilated work area.
9
DO NOT operate the tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or heavy dust.
8
DO NOT use the tool around corrosive chemicals which can damage the tool.
8
DO NOT abuse the flexible cable. Never use the flexible cable to carry the tool.
8
DO NOT drop the borescope, it is not shock proof.
8
Keep the tool dry, clean, free from oil, water and grease.
9
WARNING: The handheld display unit is NOT waterproof.
‰
Handle the borescope with care. If it is dropped, check for breakage and any other conditions which may affect its operation.
9
DO NOT immerse the imager head and cable into corrosive substances, petroleum or oil.
8
DO NOT use near moving machinery.
8
DO NOT use excessive force to insert or withdraw the imager head or cable.
8
DO NOT use the tool while tired or under the influence of drugs, alcohol, or intoxicating medication.
8
DO NOT over-reach. Maintain proper footing and balance at all times.
8
DO NOT use the tool for personal or medical use in any way.
8
1.2. The warnings, precautions and instructions discussed in this instruction manual cannot cover all possible conditions and situations
that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this
product, but must be supplied by the operator.
2. INTRODUCTION
High performance palm sized borescope is equipped with an LED light, 70mm colour TFT screen, high resolution camera and recorder
with playback mode. Its biggest feature is the clever 2-way articulated probe tip giving you up to 350° of viewing which gives greater
control to the user. Videos and images are stored on its 8GB Micro SD card (supplied) and can be transferred to a PC via the USB
data cable (supplied). Waterproof probe pod with IP67 rating and supplied in storage case. Powered by 4 x AA (not supplied).
3. SPECIfICATION
MODEL NO: ............................................................ VS8233A
Camera: . .................................................................... Ø6mm
Power Source: ...................................... 4 x AA (not supplied)
Viewing Angle:...................................................................60°
Pod Length: .................................................................. 20mm
Camera Probe Length: ............................................... 800mm
Screen Size: ................................................................. 70mm
Screen Resolution: ...................................... 640 x 480 Pixels
Mirror Flip/Rotate Function: . ............................................ Yes
Record Function (Video + Still): ....................................... Yes
USB Connection: .............................................................. Yes
SD Memory Slot: .............................................................. Yes
© Jack Sealey Limited
VIDEO BORESCOPE - ARTICULATED
VS8233A
MODEL NO:
Original Language Version
VS8233A Issue: 1 02/12/19