Using "Full Body" Program - Panasonic EP-MA01 Operating Instructions Manual

USING "FULL BODY" PROGRAM
[Program Selection Mode]
1
E15
Press the
selection mode for FULL BODY Programs.
(The power will turn off automatically if no operation is performed within 3
minutes after entering the program selection mode.)
1
Press
Select one of "缓和酸痛 (DEEP)", "舒展放松 (RELAX)", "活力畅快
(REFRESH)" and "8分钟速按 (QUICK (8 min.))".
The leg/foot massage start simultaneously no matter which programs are selected.
"FULL BODY" Program characteristics
缓和酸痛 (DEEP)
When you want to have a firm deep
tissue massage for neck and shoulder
stiffness, lower back fatigue and your
entire body, the massager will knead your
neck and shoulder area upwards and
downwards, and roll your entire body.
舒展放松 (RELAX)
When you want to have a gentle tension-
releasing massage for neck and
shoulder stiffness, and full body fatigue,
the massager will focus on kneading and
stretching the back muscles to gently
2
relax the entire body.
2
Select a program and press the
1 The unit will automatically recline to the correct massage position.
Massage
Position
Raised
approx. 30°
2 Put your head and shoulders on the backrest.
Massage
Head
button to enter the program
to select a program.
A flashing arrow indicates the currently
selected program.
活力畅快 (REFRESH)
When you want to have a rhythmical
massage for neck, shoulder and lower
back stiffness, the massager will focus
on tapping to the entire body.
This massage program invigorates and
refreshes.
8分钟速按 (QUICK (8 min.))
When you want to have a quick tension-
releasing massage in your short break,
based on the "缓和酸痛 (DEEP)" program,
the massager will concentrate on kneading
and loosening the points where stiffness
and fatigue are easily felt in an abbreviated
8-minute program.
Reclined
approx. 18°
button.
If the massage lounger is
reclined further than the
massage position angle, it will
not automatically return to the
correct massage position.
Lower the massage heads from
their upper retracted position.
The massage heads will
move slowly upwards with
the unit emitting a beeping
sound.