GE 4PE350A3 Instructions Manual page 9

EBI-6351
PRODUCTION CHANGE SHEET
COLOR CAMERA
MODEL 4PC19D3
RLC-A
MECHANICAL
The locations of the tally lights have been changed to make them visible when the lens
shade is used. To effect this change on Cameras shipped before this Production Change,
communicate with VCPD Service Engineering Section.
RLC-B
MECHANICAL
The sync adder board, PL -7782689G1, was relocated just inside the hatch in the top of
the Camera, adjacent to J10 (see Fig. 5) and the opposite side of the partition to the view-
finder video amplifier board, PL -7672681G3.