GE 4PE350A3 Instructions Manual page 17

COLOR CAMERA
EBI-6351
+20 volts d -c.
-20 volts d -c.
-6 volts d -c.
2. Signal Inputs
Camera Blanking:
60 volts ± 5.0 peak -to -peak.
Calibrate:
15 -kHz sawtooth,
adjustable from
0.4 to 1.0 volt peak -to -peak.
Control Voltage -Beam:
Plumbicon Grid 1.
Control Voltage -Focus:
Plumbicon Grid 3.
Filament Voltage:
-6.0 volts d -c.
3. Signal Output
Typically 0.20 volt peak -to -peak into
51 ohms (luminance) and 0.30 volt peak -to -
peak into 75 ohms (chrominance).
MECHANICAL
Length: 7.00 inches
Width:
2.50 inches
Height:
1.00 inch
Luminance Video Amplifier Board,
PL -7674514
ELECTRICAL
1. Power Inputs
+20 volts d -c.
-20 volts d -c.
2. Signal Inputs
Video:
Typically 0.20 volt peak -to -peak.
Squash Pulse:
4.0 volts ± 0.5, 15 -kHz rate, 7 mi-
croseconds wide, negative going.
3. Signal Outputs
Luminance Video:
0.7 volt ± 0.1 peak -to -peak into 51
ohms.
Video Level:
0.7 volt d -c, across 100,000 ohms
(d -c metering).
MECHANICAL
Length:
9.00 inches
Width:
2.50 inches
Height:
1.00 inch
Chrominance Video Amplifier Board,
PL -7674505
ELECTRICAL
1. Power Inputs
+20 volts d -c.
-20 volts d -c.
2. Signal Inputs
Video from Red, Blue, and Green Pre-
amplifiers:
Typically 0.30 volt peak -to -peak.
Squash Pulse:
4.0 volts ± 0.5, 15 -kHz rate, 7 mi-
croseconds wide, negative going.
3. Signal Outputs
Red, Blue, Green Video, Two Outputs
Each:
0.7 volt ± 0.1 peak -to -peak into 51
ohms.
Video Level (Red, Blue, and Green;
DC Metering):
0.7 volt d -c across 100,000 ohms.
3