Panasonic AG-CX350 Manual page 18

18
The AG-CX350 Book: Preparation before recording
2-5-2. Assignable functions (Continued)
Menu item
A.IRIS LEVEL
IRIS
( ) Y GET
FOCUS MACRO
O.I.S.
i.ZOOM
( ) D.ZOOM
IR REC
( ) FAST ZOOM
PRE REC
VFR
SUPER SLOW
REC CHECK
BACKGR PAUSE
DEL LAST CLIP
SLOT SEL
( ) EXPAND
( ) PEAKING
( ) WFM
ZEBRA
LEVEL GAUGE
LEVEL GAUGE SET
LCD/VF HDR
( ) VF ON/OFF
LCD/VF DETAIL
AUDIO MON SEL
MENU
LOAD SETUP FILE
LCD BACKLIGHT
( )CARD READER MODE
( )STREAMING START
Description
Turn ON/OFF auto iris level adjustment mode that allows users to
set auto iris target level.
Enable/disable auto iris mode.
Turn ON/OFF the spot meter function.
Turn ON/OFF the macro mode. With macro mode ON, focus
adjustable range at Wide-end is from 10cm to infinity. (With macro
mode OFF, from 1m to infinity.)
Turn ON/OFF the optical image stabilizer.
Turn ON/OFF the i.Zoom mode that allows the camera to magnify
the image (electronically).
Use Digital Zoom (electronic image magnification) feature. The
magnification ratio can be set from x2, x5, x10, or can be toggled
through each of them.
Turn ON/OFF the Infrared shooting mode.
Increase servo zoom speed.
Turn ON/OFF the pre-record mode. This mode allows the camera
to start recording video and audio from approx. 3 to 10 sec before
the REC/PAUSE button is pressed.
Enable/disable variable frame rate record function.
Turn ON/OFF super slow record mode.
Plays last 3 sec of the last recorded clip on the SD memory card.
Quit from the Background record mode (P.60)
Delete the last clip from the memory card.
Switch memory card slots for recording/playing back.
Turn ON/OFF image magnification focus assist function.
Turn ON/OFF peaking and square focus assist function.
Display the Waveform or Vector scope on the built-in LCD monitor.
Set MENU > VIDEO OUT/LCD/VF > EI ASSIST > WFM mode to
select the item (Waveform or Vector scope).
Turn ON/OFF the ZEBRA indicator.
Display a level gauge on the viewfinder for the horizontal and
vertical axes. Inclinations can be indicated up to approx. 30
degrees in the horizontal, and the vertical directions.
Set the current angle as level gauge reference.
Choose image mode to be displayed on the built-in LCD monitor
and viewfinder from High dynamic range to standard dynamic
range.
Turn ON/OFF the EVF display.
Make focusing easier by enhancing the subject s edge on the
viewfinder and built-in LCD monitor.
Output audio on the CH3 and 4 from AV OUT, phones out, and
built-in speaker while keep pressing the USER button.
Open MENU.
Recall set up file (setting data) from an SD memory card.
Set backlight level of the built-in LCD monitor.
Turn ON/OFF card reader mode (USB mass storage mode).
Start/stop video streaming distribution from the AG-CX350.