Accessory And Tripod M Ounting Holes; Bottom View - Panasonic AG-CX350 Manual

12
The AG-CX350 Book: Preparation before recording

2-2. Accessory and tripod m ounting holes

1/4-20UNC
The AG-CX350 has two screw holes for tripod mount, industrial standard size and
3/8-16UNC
cinema/broadcast equipment standard size.
BOTTOM VIEW (holes for m ounting tripod)
Use screws shorter than 5.5mm in length, otherwise damage may occur to internal parts.
Size 3/8-16UNC
Size 1/4-20UNC
REAR VIEW (holes for m ounting an accessory)
Use screws M3 size and shorter than 6.0mm in length, otherwise damage may occur to internal
parts.