PowerXL Pro XR GLA-1001 Owner's Manual page 10

Using the Accessories
Using the Rotisserie Spit
1. With the Forks removed, force the Rotisserie Shaft through
the center of the food lengthwise.
NOTE: To support the food on the Rotisserie Spit better,
insert the Rotisserie Forks into the food
at different angles (see Fig. C).
2. Slide the Forks (A) onto each side of the Spit and secure
them in place by tightening the two Set Screws (B).
3. Hold the assembled Rotisserie Spit at a slight
angle with the right side higher than the left side
and insert the left side of the Spit into the Rotisserie
connection inside the appliance (see Fig. D).
4. With the left side securely in place, lower the right side of
the Spit into the Rotisserie connection on the right side of
the appliance (see Fig. E).
5. To remove cooked food, insert a large fork into the food,
twist left, and raise to remove the Spit from the left slot and
then remove the food from appliance with slight lifting
motion (see the "Removing the Rotisserie Spit" section).
Transfer the food to a carving board or serving plate.
10
10 Quart PowerXL Air Fryer Pro XR™
B
Fig. C
Fig. D
Fig. E
A