Advertisement
Advertisement
Table of Contents
Related Manuals for TRAMEX X5 Series
Summary of Contents for TRAMEX X5 Series
- Page 1 CONCRETE MOISTURE ENCOUNTER - CMEX5 - QUICK START GUIDE www.tramexmeters.com...
- Page 2 OPERATION Press to power ON/OFF. Shortcut Menu: To choose between scales in Non-Destructive Testing (NDT), or Recently Used Wood scales in Pin-Meter Mode, press scroll and to select and return to main screen. Full Menu: Press to access Full Menu, to scroll, to select, and to exit...
- Page 3 The built-in Relative Humidity Sensor provides Temperature, Relative Humidity, DewPoint and grains per pound readings. Last scale used is memorized on power off and automatically restored on next power up. Hold/freeze: Press once, “II” will appear on the screen. Press again to release hold.
- Page 4 PIN-PROBE WOOD/WME MODE Attach the pin-probe (if purchased) into Bayonet connection at top of the instrument. (Line up arrow on front and twist.) Use Shortcut Menu to select from Recently Used scales. Use Full Menu to select Pin Scale options (Wood Standard, Wood Species, WME, Drywall, Pin Temperature) When pins are inserted into wood, measure- ments of 5% to approx.
- Page 5 floor screeds see the online user guide. BLUETOOTH Press to switch Bluetooth ON/OFF. Read- ings will be sent to the Tramex App on your mobile device. CALIBRATION & WARRANTY Obtain Warranty online: tramexmeters.com/register Annual calibrations are recommended.
- Page 6 TROUBLESHOOTING “II” On home screen & readings frozen. Meter is on Hold. Release Hold by pressing once. Probe icon on screen crossed out when RH probe cable is connected. Check Hygro-i2 probe is attached and connected properly. Low Battery Indicator. When replacing the batteries always ensure to use Alkaline batteries.
Need help?
Do you have a question about the X5 Series and is the answer not in the manual?
Questions and answers