JVC KD-X561DBT Fitting Instructions

Single din, reverse camera installation

Hide thumbs Also See for KD-X561DBT:

JVC KD-X561DBT (Single DIN) Reverse Camera installation

RCA cable input from camera

Camera

RED Wire on Camera:

Connect to an ignition LIVE via fuse.

BLACK Wire on Camera:

Connect to black/earth wire on the

MUD Piggy-Back loom.

Yellow RCA Wire on Camera:

Connect to RCA extension cable and run

forwards to yellow RCA socket on the

back of the head-unit.

RED wire on Reverse Lamp Piggy Back

Loom.

Connect to the camera input wire on the

back of the head unit labelled 'REVERSE'.

BLACK Wire on Piggy Back Loom.

Connect to the black /earth wire on

camera Harness.

Reverse input from Piggy-Back loom/

Reverse lamp connects into

Purple/White wire marked 'Reverse'.

Table of Contents

Need help?

Do you have a question about the KD-X561DBT and is the answer not in the manual?

Page 1 JVC KD-X561DBT (Single DIN) Reverse Camera installation RED Wire on Camera: Connect to an ignition LIVE via fuse. BLACK Wire on Camera: Connect to black/earth wire on the MUD Piggy-Back loom. Yellow RCA Wire on Camera: Connect to RCA extension cable and run forwards to yellow RCA socket on the back of the head-unit.
Page 2 JVC KW-M745DBT (Double DIN) Reverse Camera installation RED Wire on Camera: Connect to an ignition LIVE via fuse. BLACK Wire on Camera: Connect to black/earth wire on the MUD Piggy-Back loom. Yellow RCA Wire on Camera: Connect to RCA extension cable and run forwards to yellow RCA socket on the back of the head-unit.