Advertisement
Installation Reference
Installing the Outdoor Optical Splitter
4 4
Optional: pole-mounting
a
Install the pole assembly on the pole.
Loosen the screw on the
Install the pole assembly on the pole.
hold hoop.
Hold hoop
Assembly
5
Route in and fix cables.
a
Determine the holes through which fibers are routed in and remove the hole blocks.
Connected to the fiber
Connected to the fiber outlet
outlet on the standby
on the main OAU 2F.
OAU 2F.
Tighten the screw on the hold hoop.
Hole blocks
Connected to the fiber outlet
on the customer equipment.
b
Complete installation of the pole assembly.
Tighten the
hold hoop.
Partially
tighten the
hold hoop.
Hooks to fix
hose clamps
Outdoor fiber trough
19
Fix the case on the pole assembly and tighten the lower hold hoop.
Fix the upper end of the case and then the lower end.
Tighten the
hold hoop.
b
Fix hose clamps on outdoor fibers.
Hose clamp
Advertisement
