Mini X/X+ 2.5" Bay Installation - iXsystems TrueNAS Mini Series Basic Setup Manual

4.2 Mini X/X+ 2.5" Bay Installation

The Mini X and X+ have two 2.5" sdd drive bays.
To remove the tray, release the latch by sliding the button to the left (1). Gently swing the latch to
the right (2), then slide the tray out (3). Remove the filler tray from the drive tray by removing the
screws (4), place the drive in the tray and secure the drive to the tray with the provided screws (5).
Follow the same process for both drive trays. To reinsert the the tray in the unit, follow the inverse
of the removal steps. Gently insert the tray into the bay until it stops (6) and the latch is nearly shut.
Swing the latch closed until it locks (7).
Support: 855-473-7449 or 408-943-4100 Page 8 Email: support@ixsystems.com