Do you have a question about the BREMEN SQR 46 DAB and is the answer not in the manual?
Questions and answers
Richard Bosworth
April 14, 2025
Blaupunkt Bremen SQR 46 DAB: I'm trying to set radio stations. How do I manually access or tune to a specific station, such as 550FM or 97.1 FM and then connect that station to a specific button for replay?
1 comments:
Mr. Anderson
April 15, 2025
To manually tune to a specific radio station on the Blaupunkt Bremen SQR 46 DAB:
1. Press the 'TUNER' button on the front panel. 2. Use the up/down arrow buttons to navigate through available FM frequencies. 3. Press the 'ENTER' button to confirm the desired frequency.
To assign the tuned station to a button:
1. Press and hold one of the preset buttons (1–5) for about 2 seconds. 2. The current station will be assigned to that button.
In case of doubt, stop at a suitable location and do not observe the safety notes in these instructions. These instructions BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB operate your device while the vehicle is standing. contain important information to easily and safely install and operate Always listen at a moderate volume to protect your hearing and to the car sound system.
Declaration of conformity Optional equipment (not part of the scope of delivery) The Blaupunkt Competence Center Car Multimedia Evo Sales GmbH declares that Use only accessories approved by Blaupunkt. Information is availa- the devices complies with the basic requirements and the other relevant ble from your Blaupunkt specialised dealer or on the Internet regulations of the directive 2014/53/EU .
To cancel a switched-through traffic announcement, press the stallation instructions and you did not switch the device off by pressing the button. On/Off button. BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB DAB mode Volume With DAB, you can enjoy radio in digital sound quality. In contrast...
Page 5
Briefly press the button to change to the previous/next en- △/▽ BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB Press the button > to play back the service. semble. The first available service in the ensemble is played. The selected service is being played. You are exiting the list selection.
ABCDEF Service name mode. Switching may become necessary if the reception quality in the DLS mode Dynamic Label Service DAB or FM mode drops signigicantly. BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB ABCDEF Ensemble name DAB-PTY DAB1 DAB memory bank/ You can select a programme type with the PTY function to purposefully search for services, for example, that broadcast rock music or sport events.
) is switched on. Note: The sensitivity of seek tuning can be adjusted . In FM setting, the BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB If you adjust a different reception area than “EUROPE ”, RDS is automati- sensitivity can be selected, Low or High.
Note: With Travelstore, you can automatically search for and stored the 5 FM BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB stations offering the strongest reception in the region in the FMT memory In the reception area "EUROPE", you can adjust the language in which bank.
A list of compatible iPod and iPhone models is located at the end of Press the DIS button to toggle between the displays: these instructions. Blaupunkt can not guarantee the flawless func- tion of other iPod and iPhone models. Display...
Disconnect the USB data carrier. Selecting a folder (in MP3/WMA mode only) BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB After you pulled off the data carrier from the USB port at the front Press the button 1 and long press the rotary control back to of the device, close the protective cap of the USB port : .
Page 11
WMA mode and the track name in iPod mode before the display switches to the defined display. Opera- Display Meaning BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB Browse mode tion In browse mode, you can directly search for and select a certain track on the Repeating...
2 seconds to start the search function. Bluetooth devices must be located near the car sound system (in the vehicle) BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB You can now enter a file name with up to 16 characters: to establish and maintain a connection.
"CONNECTED", as soon as the car sound system and the To go back to the next higher-level menu,turn the rotary control cell phone are paired and connected. BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB until the "<<<" option is selected and press the rotary control. Note: If a Bluetooth®...
The current audio source is muted and a as the car sound system and the streaming device are paired and BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB ring tone is played via the loudspeakers of the car sound system.
Page 15
You can now enter a phone number with up to 20 digits: The display shoews first phone book entry that starts with the sel- BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB Turn the rotary control to select a digit for the respective position.
Page 16
Please note that the duration of the voice recognition is limited and de- BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB pending on the respective cell phone. Speed dial for any phone number or for the number dialed last or a...
Press the SRC button repeatedly until "BT-STREAM" appears on if the phone book of the connected cell phone was transferred BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB the display. The playback starts. to the car sound system (see the chapter "Phone book functions").
(see the next section) or unpair another cell phone, if car sound system. BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB necessary, so that its phone book is also deleted from the car sound The car sound system can store the phone books of the paired telephones system (see the chapter "Additional functions in the Bluetooth®...
Page 19
Press the rotary control to go to the next position. If no connection can be established, the display briefly shows "CONNECT FAILED". If the device is already connected, the display BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB Managing paired devices briefly shows "CONNECT EXIST".
With the setting ON, navigation announcements Note: BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB of the connected cell phone are played back simultaneously with the re- The "SET AS MASTER" menu item is shown only if two cell phones spective active internal audio source of the car sound system (e.g.
Rotary treble control to change the setting until the desired level is Adjusting bass and treble set. Setting the left/right volume distribution (Balance) or front/rear BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB BALANCE (Fader) Left/right BALANCE distribution. Settings: L9 (left) to R9(right).
Turn the rotary control to set the level or frequency. Press the rotary control to confirm the setting. Turn the rotary control to change the between the settings. BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB Press the rotary control to confirm the setting. AMP DELAY Setting the delay with which a connect amplifier is switched in.
Adjusting bass frequency and level of the equalizer. AUDIO (see chapter "Sound settings") Press the rotary control to open the menu. Turn the rotary control to change between the following menu DISPLAY BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB items: VOLUME – FREQUENCY (settings: 80/100/200 Hz) CLOCK –...
Page 24
As soon as a programme type has been selected, this programme type Turn the rotary control to change between the settings. BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB is shown as menu item in the menu instead of "PTY TYPES". Press the rotary control to confirm the setting.
Page 25
Automatic switching of the display brightness is possible only If your car sound system is installed as described in the installation instructions and SERVICE LINK BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB your vehicle features the corresponding connection. Select the service link type. Settings: OFF,ALL,DAB,FM SCROLLING Press the rotary control to change the setting.
Page 26
Setting the power-on volume. Settings: ON VOLUME (power-in volume; 1- Press the rotary control to change the setting. 50) or LAST VOLUME (volume set last before switching off the car sound BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB Turn the rotary control to change between the settings. sustem).
Page 27
Press the rotary control to confirm the setting. Press the rotary control to change the setting. Turn the rotaty control to set the volume. BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB Setting the time. Press the rotary control to confirm the setting.
Press the rotary control to change the setting. Turn the rotary control clockwise to set the hours. Menu item Factory setting BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB Turn the rotary control counter-clockwise to set the minutes. TUNER AREA EUROPE Press the rotary control to confirm the time setting.
Useful information Input sensitivity Warranty MIC : 300 mV / 10 kΩ The warranty terms can be called up from www.blaupunkt.com. Dimensions and weight BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB Service W x H x D: 178 x 50 x 110 mm...
Need help?
Do you have a question about the BREMEN SQR 46 DAB and is the answer not in the manual?
Questions and answers
Blaupunkt Bremen SQR 46 DAB: I'm trying to set radio stations. How do I manually access or tune to a specific station, such as 550FM or 97.1 FM and then connect that station to a specific button for replay?
To manually tune to a specific radio station on the Blaupunkt Bremen SQR 46 DAB:
1. Press the 'TUNER' button on the front panel.
2. Use the up/down arrow buttons to navigate through available FM frequencies.
3. Press the 'ENTER' button to confirm the desired frequency.
To assign the tuned station to a button:
1. Press and hold one of the preset buttons (1–5) for about 2 seconds.
2. The current station will be assigned to that button.
This answer is automatically generated