Advertisement
Table of Contents
Advertisement
Table of Contents
Related Manuals for Lidix ML Series
Summary of Contents for Lidix ML Series
- Page 1 ML-Series User’s Manual (USA ONLY)
-
Page 2: Table Of Contents
ML-Series User’s Manual Contents 1. Safety Information 2. Operating Environment 4, 5 3. Installation / Moving 4. Maintenance / Checking 5. Machine Overview 6. Operation Panel Overview 7. Basic Operation 8. Counting Mode 9. User Setting 10. Daily Cleaning 11. Accessories & Option, Specification... -
Page 3: Safety Information
ML-Series User’s Manual Safety Information These warnings and precautions are included in order to prevent injury to you and others, as well as preventing any potential damage to your machine. Be sure to read and understand all of these instructions before using the machine. Use common sense for operating any electrical appliance and whenever using your machine. -
Page 4: Operating Environment
ML-Series User’s Manual Operating Environment Warning Do not use if the power cord is damaged or if the electrical outlet is not grounded. ► This could result in electric shock or fire. Do not place anything on top of the machine (water, small metal or heavy objects, etc.). ►... - Page 5 ML-Series User’s Manual Operating Environment Caution Be careful not to put your hand, hairs and clothes(including tie) when handling machine. Do not forcefully pull the note out during counting. ► It can cause damage to the machine. Be care when removing jammed notes. ►...
-
Page 6: Installation / Moving
ML-Series User’s Manual Installation / Moving Caution Before moving the machine, turn the power off and disconnect the cord. Make sure lift the machine using both hands. ►The machine could fall, causing injury or machine damage. Do not place the machine on an unstable surface. Make sure you plug the power cord into a grounded electrical outlet. -
Page 7: Maintenance / Checking
ML-Series User’s Manual Maintenance / Checking Caution Unplug this product from the wall outlet before cleaning the inside of the machine. Do not clean the machine with benzene, paint thinner or alcohol; do not spray water directly into the machine. ►This could result in electric shock or fire. -
Page 8: Machine Overview
ML-Series User’s Manual Machine Overview 1 Hopper Guide 8 Lower Cover 2 Display Case 9 Thickness Dial 3 Touch LCD 10 Upper Rear Cover 4 LU Front Cover 11 Interface Connector 5 Stacker 12 Power Switch 6 Hopper 13 Lower Rear Cover 7 Upper Cover 14 Inlet... -
Page 9: Operation Panel Overview
ML-Series User’s Manual Operation Panel Overview Model: ML-2V Model: ML-2F Mode Setting Area Counting Result Area Indicator Area... - Page 10 ML-Series User’s Manual Operation Panel Overview 1. Key Configuration FUNCTION FUNCTION Screen Saver Function. Printing out the Denomination Information Choosing Key on the Menu between Left and Right Selecting Currency Selecting Different Count Mode Choosing Key on the Menu between Up and Down Counting Stop or Restart.
- Page 11 ML-Series User’s Manual Operation Panel Overview 3. Screen Configuration for Indicator Area ICON DESCRIPTION ICON DESCRIPTION Current User ID Icon will be ON during the data transfer Icon will be ON when USB Memory Card is Icon will be ON when Suspicious Note is detected connected Icon will be ON when PC is connected Icon will be ON when the Fitness Sorting Mode is ON...
-
Page 12: Basic Operation
ML-Series User’s Manual Basic Operation STEP 1. Plug the power cord into the power receptacle. STEP 2. Turn on the Power Switch. STEP 3. Select the Currency STEP 4. Select a Counting Mode. STEP 5. Adjust Hopper guide to the notes to be counted. STEP 6 Put the notes onto the Hopper, and counting starts automatically. -
Page 13: Counting Mode
ML-Series User’s Manual Counting Mode Mode Description MIX MODE It count the all denomination of selected currency. It sorts out the denomination by preselected batch setting. Presort MODE (This mode will be activated only when the “Batch by Denom” setting is ON in User Setting) SP MODE It sorts out the same denomination as first inserted note It sorts out the note depending on the front or rear side of note. -
Page 14: User Setting
ML-Series User’s Manual User Setting 1. Function Icon Sub-Icon DESCRIPTION Sub-Icon DESCRIPTION Start Method Start Delay Counting Start Function Counting Start Delay Function (Default: Automatic Start) (Default: Normal Start) Details of counting result will be Count Detail Batch Keep Off displaced in the screen Batch Counting Time Function during counting... - Page 15 ML-Series User’s Manual 2. External Device Icon Sub-Icon DESCRIPTION Sub-Icon DESCRIPTION Baurate Printer Data Transfer Speed Copies Printing Copy Setting Setting (Default: 1 copy) (Default: 115200) Additional Print Option Paper Size Printer Paper Size Setting Additional Printing Option Setting (Default: 3-inch) (Time &...
- Page 16 ML-Series User’s Manual User Setting 3-1. UI Config #1 Icon Sub-Icon DESCRIPTION Sub-Icon DESCRIPTION Sub-Icon DESCRIPTION Alarm Error Start Sound Start Sound Alarm Sound Setting Error Sound Setting Setting (Default: Bubble) (Default: Beep) (When turning on the machine) Touch Volume Touch Screen Sound Key Sound Setting Setting...
- Page 17 ML-Series User’s Manual User Setting 3-2. UI Config #2: Display Language Icon Sub-Icon DESCRIPTION Display Language Selecting Language of Software (Default: English) 3-3. UI Config #3 Icon Sub-Icon DESCRIPTION Sub-Icon DESCRIPTION Sub-Icon DESCRIPTION Brightness Touch Screen Calibration Sensitivity Touch Screen Calibration Screen Brightness Sensitivity Setting...
- Page 18 ML-Series User’s Manual 5. User ID Icon DESCRIPTION When Dual User function is Off Single User Identification Setting (Default is Off) Dual (Right and Left) User Identification Setting When Dual User function is On (The Right User and Left User can be selected separately) * Remarks 1.
- Page 19 ML-Series User’s Manual User Setting 6. Product Info Icon DESCRIPTION Information of Machine’s Serial Number, Manufacturing Date Main Hardware Version & GUI Hardware Version Information of Main Firmware Version & GUI Firmware Version Information of Each Currency’s Software Version & Fitness/Serial Number Printing Availability * Remarks - After changing the User Setting, press the...
-
Page 20: Daily Cleaning
ML-Series User’s Manual Daily Cleaning 1. Turn off the machine before starting the cleaning. 2. Remove any foreign material or the dust inside of the machine and clean the sensors, which is described as below. NAME ① Hopper Sensor ② UV&FL Sensor and Counter Sensor 1 ③... -
Page 21: Accessories & Option, Specification
ML-Series User’s Manual Accessories & Option 1) Accessories 2) Options NAME Quantity NAME Power code 1 set External Display (2-Line FND or LCD) User’s Manual 1 set Thermal Printer (2 or 3 inch) Specification CONTENTS DESCRIPTION Value Counting 1500 notes/min Speed Fitness Sorting / OCR.
Need help?
Do you have a question about the ML Series and is the answer not in the manual?
Questions and answers
Hi how do I change the batch setting to batch it’s on D-O at the moment
My currency counter keeps telling me there is a jam error or a soft test error. There is nothing in the machine
If your Lidix ML Series currency counter shows a jam error or soft test error despite being empty, turn off the machine and clean the inside, especially the sensors. Remove any dust or foreign material from sensors such as the Hopper Sensor, Counter Sensors, and Reject Sensor. Do not use tweezers or sharp metal objects to remove debris.
This answer is automatically generated