Step 2: Enable The Sbc Application - NEC SV9100 Configuration Note

Configuration Note
4.2

Step 2: Enable the SBC Application

This step describes how to enable the SBC application.

To enable the SBC application:
1. Open the Applications Enabling page (Configuration tab > VoIP menu >
Applications Enabling > Applications Enabling).
2. From the 'SBC Application' drop-down list, select Enable.
3. Click Submit.
4. Reset the E-SBC with a burn to flash for this setting to take effect (see Section
page 62).
Version 7.0
Figure 4-4: Enabling SBC Application
27
4. Configuring AudioCodes E-SBC
AudioCodes Mediant E-SBC
4.13 on