Liner And Electrode Selection - Arkon MAGS1 User Manual

7. Liner and electrode selection

Liner and electrode material selection are an important issue when choosing your flowmeter. The tables
below serve to give you an idea of general material compatibility. If you are not sure about suitability of
liner/electrode material for a particular medium, please contact the Arkon sales department for further
assistance, and the site where the flowmeter is to be used for what materials are acceptable for the process
media. Arkon can only recommend materials, we cannot guarantee them.
Please note that Arkon offers also WRAS approved material for all standard sizes. For more info contact
our sales department.
Liner Selection:
Hard Rubber Drinking water and wastewater
Soft Rubber Water with abrasive particles
PTFE Chemicals and food industries
Electrode selection:
Stainless Steel General purpose, sewage, water
Hastelloy Seawater, Chemicals
Titanium Aggressive chemicals
Platinum Aggressive chemicals
MAGS1 User Guide 22
0 - 70°C
0 - 70°C
0 - 130°C
V1.5 22-1-2016