Advertisement
6
Alliance Arming Station
Installation Instructions
FCC compliance (AL-1116 only)
This device complies with part 15 of the FCC rules. Operation is
subject to the following conditions:
1.
This device may not cause harmful interference.
This device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
FCC ID: CGGATS111X
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communi-
cation. However, there is no guarantee that interference will not
occur in a particular installation.\
If this equipment does cause harmful interference to radio or tele-
vision reception, which can be determined by turning the equip-
ment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet or a circuit different
than that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
Toll-free: 888.GESECURity (888.437.3287 in the US, including Alaska and Hawaii; Puerto Rico; Canada).
Outside the toll-free area: Contact your local dealer.
Specifications
Supply voltage
Maximum operating current
Normal operating current
AL-1111
AL-1116
Dimension with cover (W x H x D) 3.6 x 6.5 x 1.0 in. (92 x 165 x 25 mm)
Operating temperature
Maximum humidity
Listings
Technical support
www.gesecurity.com
9 to 14 VDC
270 to 300 mA
26 mA at 13.8 VDC
35 mA at 13.8 VDC
32 to 122°F (0 to 50°C)
95% noncondensing
UL 264, the Standard for Access Control
System units
UL 365, the Standard for Police Station
Connected Burglar Alarm Units and Systems
UL 609, the Standard for Local Burglar Alarm
Units and System
UL 1610, the Standard for Central Station
Burglar/Alarm Units
UL 1635, the Standard for Digital Alarm
Communicator System Units
Advertisement
