Design Your Own Toolheads - Zmorph 2.0 S User Manual

MAINTENANCE AND FUNCTION / TROUBLESHOOTING AND ADJUSTMENTS

DESIGN YOUR OWN TOOLHEADS

If you're experienced enough to create and build your own toolhead,
please read information here:
http://zmorph3d.com/custom-toolhead/
If you want to design your own toolhead, check specifications of the mount and wiring at:
www.zmorph3d.com
You can download CAD files, technical drawings and working examples.
For your disposal you will have:
Two stepper motor drivers, able to drive up to 2A per motor
(typically NEMA17, but you can also try bigger motors)
Two high-power 24V outputs (typically used for heaters)
Three smaller-power 24V outputs (typically used for fans, lighting etc)
Two sensor inputs (typically used for thermistors)
76