Fitting Kits And Spare Parts; Service Kits; Hoses; Adapters - Ametek T Series Operation Manual

„

FITTING KITS AND SPARE PARTS

Service Kits

T-1
X
T-250 . . . . . . . . . . . . . Buna N rebuild kit
T-559 . . . . . . . . . . . . . Viton rebuild kit
T-326 . . . . . . . . . . . . . EPT rebuild kit

Hoses

T-1
X
KH-18 . . . . . . . . . . . . Hose. 0.46 m 1/4" NPT male x 1/4" NPT male 700 bar / 10 000 psi.

Adapters

T-1
X
T-134 . . . . . . . . . . . . . Union Body. 15/16-20 UNEF male x 1/4" NPT female.
T-135 . . . . . . . . . . . . . Union Body. 15/16-20 UNEF male x 1/2" NPT female.
T-186 . . . . . . . . . . . . . Union Body. 15/16-20 UNEF male x 7/16" NPT female.
T-331 . . . . . . . . . . . . . Union Body. 15/16-20 UNEF male x 3/8" NPT female.
T-863 . . . . . . . . . . . . . Union Body. 15/16-20 UNEF male x 1/8" NPT female.
T-786 . . . . . . . . . . . . . Adapter. 1/4" NPT male x 1/4" BSP female.
T-787 . . . . . . . . . . . . . Adapter. 1/4" NPT male x 1/2" BSP female.
T-915 . . . . . . . . . . . . . Quick Connector. 1/4" NPT male.
T-916 . . . . . . . . . . . . . Quick Connector Plug. 1/4" NPT male.
„

RECOMMENDED RECERTIFICATION PROCEDURES

All deadweight pressure testers produced by AMETEK, M&G are tested and certified in the M&G laboratory for accuracy of pressure produced, with results
traceable to the National Institute of Standards and Technology.
In addition, if ±0.025% or ±0.015% accuracy is required, data is furnished showing nominal and observed pressures within the upper 90% of the range of
each piston and cylinder, with results directly traceable to the National Institute of Standards and Technology.
Note:
This data is optional on the ±0.010% units.
This accuracy can degrade with wear resulting from continued use and/or incidental damage. AMETEK, M&G recommends all instruments be periodically
retested for accuracy. Testers returned to AMETEK, M&G will be "Tested and re-certified with data furnished traceable to NIST. "
Support
Type T Hydraulic Deadweight Tester Operation Manual
26
