Messages Displayed With Error Codes - Ricoh IM C2000 Series User Manual

Message
"Z-fold error." A setting in which Z-
fold cannot be
performed was
specified, and the
Z-fold function was
canceled.

Messages Displayed with Error Codes

Check the system configuration list or print settings list. The details of the error may also be printed in the
list.
See "List / Test Print", User Guide (Full Version).
See below when [Standard] is specified as the screen type of [Settings]. The names of the setting items
may differ from the [Classic] screen type.
See "List/Test Print", User Guide (Full Version).
For details, see "Settings Menu Compatibility List (Classic to Standard Settings)", User Guide (Full
Version).
Message
"84: Error"
"86: Error"
"91: Error"
(displayed in the error
history)
"92: Error"
(displayed in the error
history)
Cause
Check the tray, paper orientation and print data
orientation settings, and the specified position for post-
processing.
Cause
The amount of available
work area is insufficient for
processing images.
The parameter in the control
code is incorrect.
The auto job cancel function
was activated because an
unable-to-analyze-
command or illegal
command error occurred,
and printing was canceled.
Printing is canceled from the
control panel.
When a Message Appears While Using the Printer Function
Solution and reference
Solution and reference
Reduce the transmission data.
Specify the correct parameter.
Check that the data is correct.
To perform printing, operate the control
panel again.
269