Table of Contents
Advertisement
SureSafeGO 24/7 Monitored
7. Automatic Fall Detection
How it works:
The device must sense a specific change in height and pendant angle, and must also sense an impact. The alarm must fall at least 1 meter, and angle change
over 45 degrees. The authorized numbers will be alerted by text message without the user pushing SOS button when the fall sensor is activated.
When the SureSafeGO detects a fall, the pendant will start to beep. The fall detection can be cancelled by either pressing the SOS button or returning the
pendant to a standing position before the beeps stop.
Very Important: Due to the varied nature of falls, not all falls will be detected. We strongly recommend that the user pushes the SOS button if possible. Also,
wearing your SureSafeGO on your wrist significantly reduces its ability to detect falls. See Automatic Fall Detection disclaimer for more details.
Example:
FL1
After sending FL1 to the SureSafeGO, the device will send a text message alert to all authorised numbers when a fall is detected.
To turn off this function, please send
FL0
The default is OFF.
8. Check Programming
Command:
STATUS
The device will reply e.g. A+447712345678 B+447712345678 C+447712345678; Speed: 0,100km/h; GEO:0,0,0; VB:1,10S; MV:1,100; LED:0; TZ:2.0; LI: 1; PS:1;
DS:0,3M; FL:1; Bat: 95%; SMS:0;LOCK:0
In the above example this shows that A1, B1 and C1 are all programmed with the telephone number +447712345678, Automatic Fall Detection is ON, Power
Saving Mode is ON and the battery is at 95% (highlighted for illustrative purposes).
The number "0" implies that the function is turned off; whilst "1" indicates that the function is turned on.
- 11 -
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the GO and is the answer not in the manual?
Questions and answers
MY WATCH WONT CHARGE WONT WORK JUST BLACK NOTHING W=ORKS WHAT CAN I DO ITS A FEW YEARS OLD NOW. IT HAS SAVED MY LIF E TWICE SO IT IS IMPORTANT THAT IT WOTS CAN YOU ELP ME .ALEX
If your SureSafeGO watch won’t charge and is not working, follow these steps:
1. Ensure Proper Connection – Use the provided docking station or USB cable. Connect the Micro USB side to the docking station and plug the USB into a power socket.
2. Check Charging Indicators – Place the device on the docking station until it clicks and vibrates. A solid blue LED should appear while charging.
3. Wait for Full Charge – Fully charge the device for 3-4 hours before first use. The blue LED will turn off when charging is complete.
4. Try a Different Power Source – Use a different socket or USB adapter to rule out power issues.
5. Restart the Device – Press the side power button for 1 second to turn it on. If needed, place it in the docking station to turn it on automatically.
6. Check for Physical Damage – Ensure the charging port and cables are intact.
7. Contact Support – If the device still won’t charge, it may be faulty and require assistance.
Following these steps should help resolve the issue.
This answer is automatically generated