Sunny Health & Fitness SF-T7945 User Manual

Sunny Health & Fitness SF-T7945 User Manual

Walkstation slim treadmill

Advertisement

WALKSTATION SLIM TREADMILL
SF-T7945
USER MANUAL
IMPORTANT! Please retain owner's manual for maintenance and adjustment instructions. Your
satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE CONTACTED
US: support@sunnyhealthfitness.com or 1- 877 - 90SUNNY (877-907-8669).

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SF-T7945 and is the answer not in the manual?

Questions and answers

Thanh le
March 30, 2025

Lost my remote control sunny sf t7945

User image 67e9a95a3346f
1 comments:
Mr. Anderson
March 31, 2025

To replace the remote control for the Sunny Health & Fitness SF-T7945, contact customer service and provide the following information:

- Model number (found on the manual cover)
- Product name (found on the manual cover)
- Part number (from the “EXPLODED DIAGRAM” and “PARTS LIST” in the manual)

Then reach out to support@sunnyhealthfitness.com or call 1-877-907-8669.

This answer is automatically generated

Summary of Contents for Sunny Health & Fitness SF-T7945

  • Page 1 WALKSTATION SLIM TREADMILL SF-T7945 USER MANUAL IMPORTANT! Please retain owner’s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE CONTACTED US: support@sunnyhealthfitness.com or 1- 877 - 90SUNNY (877-907-8669).
  • Page 2: Important Safety Instruction

    IMPORTANT SAFETY INSTRUCTION When using an electrical appliance, basic precautions should always be followed, including the following: Read all instructions before using this treadmill. DANGER – To reduce the risk of electrical shock: Always unplug this appliance from the electrical outlet immediately after using and before cleaning. WARNING –...
  • Page 3: Important Safety Information

    IMPORTANT SAFETY INFORMATION We thank you for choosing our product. To ensure your safety and health, please use this equipment correctly. It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained, and used properly.
  • Page 4: Important Note

    IMPORTANT OPERATING INSTRUCTIONS 1. Insert the power plug directly into the socket. 2. Read the manual before operating the equipment. 3. Changes in speed do not occur immediately. Set your desired speed using the adjustment keys on the remote control. The speed will increase gradually. 4.
  • Page 5: Exploded Diagram

    EXPLODED DIAGRAM...
  • Page 6: Parts List

    PARTS LIST Description Spec. Qty. Description Spec. Qty. Main Frame Screw ST2.5*6.0 Running Board Screw ST2.9*6 Strengthen Tube Front Roller Spring Washer Rear Roller Flat Washer Allen Wrench Washer Safety Key Plate Washer Motor Top Cover Screw ST4.2*12 Motor Bottom Cover Screw ST4.2*12 Foot Pad...
  • Page 7: Carton Contents

    CARTON CONTENTS: Description Specification Qty. Walking Treadmill Remote Control Power Wire Safety Key Wrench Lubricant Oil 20ml/bottle Manual Ordering Replacement Parts (U.S. and Canadian Customers only) Please provide the following information in order for us to accurately identify the part(s) needed: ...
  • Page 8 USER INSTRUCTIONS STEP 1: STEP 2: STEP 3:...
  • Page 9: Maintenance And Care

    MAINTENANCE & CARE General cleaning will help prolong the life and performance of your treadmill. Keep the unit clean and maintained by dusting the components on a regular basis. Clean both sides of the running belt to prevent dust from accumulating underneath the belt. Keep your running shoes clean so that dirt from your shoes does not wear out the Running Board (No.
  • Page 10: Lubricating The Treadmill

    LUBRICATING THE TREADMILL IMPORTANT NOTE: You will need to lubricate your treadmill before the first use. RUNNING BELTS & TREADMILL LUBRICANT: Lubricating the Running Board (No. E12) and Running Belt (No. C07) is essential as the friction between the two affects the life span and function of the treadmill. Therefore, it is suggested that the Running Board (No.
  • Page 11: How To Move The Treadmill

    HOW TO MOVE THE TREADMILL Please remove the power cord from the treadmill before moving.
  • Page 12: Important Electrical Information

    IMPORTANT ELECTRICAL INFORMATION WARNING: This treadmill requires a power source of 8 amps (100-120V) in order to properly operate. For your safety, as well as the safety of others, verify that the power source is correct before plugging in the equipment. Any power source above or below this level could cause significant damage to the equipment and/or user.
  • Page 13: Battery Installation And Replacement

    BATTERY INSTALLATION & REPLACEMENT BATTERY INSTALLATION: 1. Remove the battery cover. 2. Take out the 1pc battery that is included inside the remote control box. 3. Install the battery into the battery holder with the positive end facing up. 4. Put the battery cover back on to the battery holder. BATTERY REPLACEMENT: 1.
  • Page 14: Window Display

    THE DISPLAY CONSOLE WINDOW DISPLAY: Displays time, distance, calories, steps and speed value in turn every 5 seconds. REMOTE CONTROL FUNCTIONS: Note: If the treadmill does not respond to the remote control, you will need to resync the treadmill and remote control. To sync the remote control with the treadmill, press the start/pause button on the remote control for five seconds.
  • Page 15: Power Save Function

    1. START/PAUSE BUTTON: Press the START button so that treadmill begins running. 0.5 MPH (Miles per hour) is the default start speed. During exercise, you also can press this button to pause the machine. 2. SPEED +/– BUTTONS: Press the +/- buttons to increase or decrease the speed in increments of 0.1 MPH (Miles per hour).
  • Page 16: Exercise Instructions

    EXERCISE INSTRUCTIONS GETTING STARTED: Before starting any exercise program, you should consult your physician to determine if you have any medical or physical conditions that could put your health and safety at risk or prevent you from using the equipment properly. Be aware of your body’s signals.
  • Page 17: Troubleshooting

    TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SUGGESTED ACTION Not plugged in Plug cord into outlet Treadmill will not start Safety Key not inserted Insert Safety Key Running belt tension not Tighten the adjustment bolts Running belt not centered correct on the left or right on the left and right side of the sides of the running board rear roller...
  • Page 18 Check motor wires to see if the motor is connected. If the The motor wire is not wire has been punctured or 0006: Motor Abnormality connected, or the motor is damaged, you will need to damaged. replace it. If the problem is not rectified, you may need to replace the motor Check the upper and middle...

Table of Contents

Save PDF