Advertisement
Quick Links
ET-2750 Start up Guide
How to load Dye Sublimation Ink on 4 Colors Epson Ecotank Printer
This guide describes the procedure on how to load Dye Sublimation Ink into the printer.
*ET 2750 pictures below but this instructions will work for other 4 Color ET units.
Menus may vary but selections remain the same.
1. Unpack and remove all protective materials from the product.
2. Unpacking the ink bottles (Follow the Instructions)
a. Take the bottle out of the poly bag
and remove the Black Tape
3. Filling the ink tanks.
a. Open the ink tank cover, then open the cap for the ink tank you are
going to fill.
INKJETBIZ
b. Unscrew the entire Cap. Break or
remove the Aluminum Seal
Call Us: a (408) 394-7595 • www.inkjetbiz.com
SUPPORT
c. Put the lower part of the cap
back on the bottle and load the inks
TB-ET2750
103-19
as shown.
Advertisement
Related Manuals for Epson ET-2750
Summary of Contents for Epson ET-2750
- Page 1 103-19 ET-2750 Start up Guide How to load Dye Sublimation Ink on 4 Colors Epson Ecotank Printer This guide describes the procedure on how to load Dye Sublimation Ink into the printer. *ET 2750 pictures below but this instructions will work for other 4 Color ET units.
- Page 2 SUPPORT TB-ET2750 INKJETBIZ 103-19 b. Position the top of the ink bottle along the slot in front of the filling port, then slowly stand the bottle up to insert it. Wait for ink to fill the tank. Do not squeeze the bottle. Ink flows into the tank and stop automatically when the ink tank is full.