The Cleaning Process Is Complete; Troubleshooting - ReadyRefresh Allure Series User Manual

d) Place a large bucket under the drain tube to catch the drained carbonation tank water
e) Using a screwdriver, turn the drain valve counter-clockwise until water begins to
flow.
f) After all water has drained from the carbonation tank, close the drain valve by
turning it clockwise with screwdriver until tight.
g) Place the carbonation drain tube back into the drain dock
h) Place a new, un opened 3 or 5 gallon bottled water on the dispenser
i) Place a cup under the dispense nozzle, reconnect power, and then press and hold the
hot unlock & hot dispense buttons together until water begins to flow
j) Press and hold the cold water button until water begins to flow
k) Press and hold the carbonation button to dispense a small amount of (8 to 12 ounces)
sparkling water in to a cup

The cleaning process is complete.

Contact Customer Service at (800) 274-5282 to learn more about the ReadyRefresh™
Professional Cleaning Service. Our dedicated ReadyRefresh™ Technicians use
professional-grade cleaners and equipment to employ a unique process that thoroughly
cleans water dispensers. Contact ReadyRefresh to schedule service today.
VI. Troubleshooting:
No water dispensing
or poor flow rate
No or slow sparkling
water only
If the SPARKLING WATER button is flashing
and will not dispense water, a reset is required.
Place a cup larger than 33oz under the spout.
Then press and hold the SPARKLING WATER
dispense button until a beep is heard (5 seconds).
Release the button. The dispenser will dispense
water for 10-15 seconds until the reset is
Rev. A - 060220