(b) Operation:
1. FINE HAND FEED
a. Turn the feed rate selector to any of the two "DUMMY" positions.
b. Engage feed trip lever from (B) to (B')
c. The quill is now under handwheel (G) control
2. POWER FEED
a. Ensure quill lock is off (C)
b. Set micrometer dial to required depth, (D)
c. Engage Feed Clutch Selector (E)
d. Select feed rate, (A)
e. Engage feed trip lever (B)
f. The feed will automatically trip out at a depth within 0.2mm
HOTE: TO INTERRUPT POWER FEED, JUST PRESS DOWN THE DISENGAGEMENT LEVER (F)
DUMMY POSITION
16