Table of Contents
Advertisement
4-1.Installation of a PCI bracket
A full height PCI bracket is attached to this product at factory shipment. If you insert this product in
a low profile PCI slot, you have to replace the bracket with a low profile one that comes with this
product.
1.
Remove the two screws of the external VHDCI connector.
Tips
2.
Remove a full height PCI bracket from this product.
3.
Install a low profile PCI bracket to this product.
4.
Tighten the two screws for the external SCSI connector.
Tips
Check
Exchange of a bracket uses the minus screwdriver suitable for the size of a
screw.
Follow the same procedure when a low profile PCI bracket is replaced with a full
height PCI bracket.
Make sure to keep the removed bracket carefully.
- 36 -
Advertisement
Table of Contents
