Starting And Stopping The Engine - Toro RP-1200D Operator's Manual

1. Fuel cap
2. Inlet fuel screen
4. Add diesel to the fuel tank. (Figure 10).
Important: Do not overfill the fuel tank.
5. Install the fuel-tank cap securely (Figure 9).
6. Wipe up any diesel fuel that may have spilled.
7. Lower the cover.
Starting and Stopping the
Engine
Starting the Engine
Model 68074:
1. Set the throttle to the Slow position (Figure 11).
Figure 9
3. Red ring
Figure 10
1. Throttle control (slow
position)
2. Slowly pull the recoil-start handle until you encounter a
slight resistance (Figure 12).
3. Let the rope run back in recoil starter.
4. Hold the recoil-start handle with both hands.
5. Pull the starting rope evenly and with increasing speed
until the engine starts.
Note: Do not sharply pull the recoil-start handle.
6. Move the throttle lever to the fast position (Figure 11).
Note: The compactor will begin vibrating when the
throttle is set to fast throttle.
Model 68075:
1. Set the throttle to the slow position (Figure 11).
2. Insert the key into the starter switch and rotate it
clockwise to start the engine (Figure 13).
Note: Release the key once the engine begins to run.
11
Figure 11
2. Throttle control (fast
position)
Figure 12