Read the safety instructions in the operating manual attentively
before using the appliance for the first time!
Quick Start
1. Pull the baking mould upward out of the appliance.
2. Place the kneading paddle on the drive shafts of the baking
mould. Make sure that it is fixed properly.
3. Place the ingredients for your recipe into the baking mould
in the specified sequence. First add the liquids, sugar and
salt, then flour, adding the yeast as the last ingredient.
4. Place the baking mould back in the appliance. Ensure that
it engages correctly.
5. Close the appliance lid.
6. Insert the power plug into the socket. A signal tone sounds
and, in the display
duration for Programme 1 appears.
7. Select the programme you want with the button Select
8. Select the level of browning required for your bread with
the button Browning
9. With the button "Bread Weight"
bread you would like.
10. You now have the opportunity to set the time for completion
of the baking period with the function button Timer
Starting the Programme
•
Start the programme with the button Start/Stop
The programme will carry out the various operations
automatically.
Ending the Programme
•
To interrupt a Programme, briefly press the Start/Stop
button
, a signal tone sounds and the time blinks.
•
To end a Programme, press the button Start/Stop
3 seconds, until a signal tone sounds.
•
To switch the appliance off, remove the power plug from
the wall socket.
When the baking process has been completed,
10 acoustic signals are sounded and the display indicates
0:00.
Concise Information
, the programme number and
.
Display
select the weight of
.
.
.
for