Sharp MD-DS77 Operation Manual page 62

MD-DS77
CHANGE THE INITIAL SETUP (pages 36 - 37)
1. Insert a MiniDisc.
2. Hold down the
for 2 seconds or more while in the stop mode.
After "SET UP" is displayed, "BEEP on" or
"BEEP off" will be displayed.
3. Slide the button to
you want to change.
BEEP on
autoCHAR
4.Press the
MODE
want to change.
Beep sound
Auto play
Auto power save
Display on the remote control
Backlight on the remote control
Operation indicator
Auto Character (*1)
62
button on the remote control
MODE
or to select a menu
autoPLAY autoPS
LIGHTnor
button to select the item you
ON
BEEP on
autoPLAY
autoPS
See table below
autoCHAR
"LIGHTnor"
Display on the remote control
Backlight on the remote control Lit for approx. 10 seconds
Operation indicator
"LIGHTall"
Display on the remote control
Backlight on the remote control Lit.
Operation indicator
"LIGHToff"
Display on the remote control
Backlight on the remote control Lit for approx. 10 seconds
Operation indicator
OFF
(*1) When kanji and katakana are included in a
BEEP off
Disc/Track name of MDs, only kanji appear
PL off
(see page 32). Cancel it to see both.
PS off
(*2) The indicator blinks for several seconds when
an MD is inserted.
While charging, the operation indicator re-
mains lit in "LIGHTnor", "LIGHTall" and
A-CHARoff
"LIGHToff" modes.
5. When the setup is completed, press the
Indicated.
when operated.
Flashing.
Indicated.
Flashing.
Indicated for approx.
10 seconds when operated.
when operated.
Goes out. (*2)
button.