Sharp MD-DS77 Operation Manual page 61

To check the playing time of each track:
1. I n t h e s t o p m o d e , s l i d e t h e b u t t o n t o
or on the remote control to select a
track number or name.
2. Press the button on the remote control.
DISPLAY
Once the playing time is displayed, you can
check it by selecting the track number.
This unit can display kanji or katakana characters
which conform to the MD standard specifications.
To check service life of the battery:
When a rechargeable battery or an alkaline battery
is used, its remaining amount is displayed.
As the battery charge drops from use, the bars in
the charge indicator will go out one by one.
When the battery is run down, "LoBATT" appears
on the display and the power is turned off.
The battery remaining amount may not be
displayed steadily for approximately 20 seconds
after the power is turned on.
The remaining amount is not displayed if the unit
is used on the battery charger.
The number of bars shown in the battery indicator
may change depending on the operation being
performed.
If you use a battery which you stopped charging
halfway, " " may appear. It does not mean that
the battery is completely charged.
"LoBATT", " " or "
rechargeable battery is low (even if a new alkaline
battery is used at the same time). Charge or
remove the rechargeable battery.
" may appear when the
Caution:
When "LoBATT" appears, charge or remove the
rechargeable battery. Leakage or damage may result.
USING WITH THE AC ADAPTOR (page 34)
1. Plug the AC adaptor into an AC outlet (AC 100 V)
and plug the other end into the DC IN 5V jack on
the battery charger.
2. Hold the unit and place it gently with the ∆Σ fac-
ing towards you.
Caution:
To ensure safety, unplug the AC adaptor from the
AC outlet if not using it for long periods.
USING WITH THE ALKALINE BATTERY
(page 35)
1. Open the battery case supplied with the unit.
2. Insert the AA size battery [LR6] into the battery
case by matching it + and – terminals to the
diagram in the battery case, and then close the
battery case.
3. Align the protuberances on the battery case with
the indentations on the side of the unit.
4. Turn the fixing screw on the battery case toward
the word "LOCK", and then make sure that the
battery case does not move.
When using this portable MD with an alkaline bat-
tery, keep the rechargeable battery in the main unit.
Do not insert a rechargeable battery (such as nickel-
cadmium rechargeable battery) into the battery case.
MD-DS77
61