Smarthub Sd Card Storage; Insert A Microsd Card - Arlo Essential User Manual
Spotlight camera
Hide thumbs
Also See for Essential:
- User manual (60 pages) ,
- Quick start manual (2 pages) ,
- Quick start manual (8 pages)
Table of Contents
Advertisement
7. SmartHub SD Card Storage
The SmartHub model VMB5000 supports SD card storage. If you use your camera with the
SmartHub VMB5000, you can use this feature.
You can insert a microSD card into the slot in your SmartHub VMB5000 and store your Arlo
recordings both in the cloud and on the SD card. If the SmartHub isn't connected to the
internet, recordings continue to be saved on the microSD card. If you have an active live
stream connection between an Arlo Ultra camera and a SmartHub, you can record to a
microSD card. Your Arlo app notifies you when the SD card is low on storage space or is full.
MicroSD card format
Your SmartHub accepts SDHC or SDXC microSD cards. We recommend using microSD cards
with a minimum of 16 GB capacity, Speed Class 10, UHS-1, V10. Your Arlo SmartHub supports
up to Class 10 UHS-3 V90.
If your microSD card isn't formatted, or is formatted with an incompatible file system, you can
use your Arlo app to format the microSD card. See
Format a microSD card
on page 51.
Insert a microSD card
1. Insert the microSD card into the slot on the bottom of the SmartHub.
2. Press the edge of the microSD card until it's completely seated in the slot.
49
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Essential and is the answer not in the manual?
Questions and answers
Where to install micro SD card essential outdoor camera 2nd gen
The Arlo Essential Outdoor Camera (2nd Generation) does not have a micro SD card slot. However, if connected to an Arlo SmartHub with local storage, it can record locally.
This answer is automatically generated
How to cut off the spotlight
To turn off the spotlight on the Arlo Essential camera while keeping motion detection on, follow these steps:
1. Open the Arlo app on your mobile device.
2. Go to Settings.
3. Select My Devices and choose your Arlo Essential Camera.
4. Navigate to Device Settings or Video Settings.
5. Look for the Spotlight option.
6. Toggle the Spotlight setting Off.
This will disable the spotlight while keeping motion detection active.
This answer is automatically generated
Need Essential XL Outdoor Camera users manual - not quick start could a hard copy be sent to me? Does not seem to be on downloads
my camera stops working at times why
The Arlo Essential camera may stop working at times due to several issues:
1. Charging problems: Some users report that the camera does not charge properly or takes too long to charge. This may be caused by a faulty connection between the micro USB port and the internal circuit board.
2. Connection issues: The camera may fail to connect to the base station, showing error code 65535. However, it may still connect over Wi-Fi.
3. Hardware defects: Some users suspect their camera was defective from the beginning, requiring repair or replacement.
4. Support delays: Difficulty in getting timely support may prevent users from resolving these problems quickly.
This answer is automatically generated
how bright is the light ?