Usb Operation - Philips 7000 Series User Manual

4.Wait until the Soundbar's indicator
becomes solid white.
5.To exit Bluetooth, switch the unit to another
source. When your switch back to Bluetooth
mode, Bluetooth connection remains active.
6.If you want to connect to another device,
press and hold the
or the Pair/BT button on the remote control
to disconnect the current connected Bluetooth
device and enter pairing mode.

USB Operation

You can play music files stored on a connected
USB device.For playable types of files,see
"supported audio formats "page 15.
Caution:USB Socket cannot charge to devices.
USB
Factory default settings
When the unit is powered on, press and hold the
VOL + &VOL - , the unit's all source LEDs lights up
5 seconds and reset the unit to factory default
settings.
14
button on the soundbar
USB
HDMI OUT OPTICAL IN AUX IN AC IN
(ARC)
Screw length/diameter
Depending on the type of wall mounting
your Soundbar, make sure that you use
screws of a suitable length and diameter.
(1) Drill two holes on the wall.
(2) Secure the dowels and screws in the holes.
(3) Hang the Soundbar on the fastening screws.
1.5-2.5mm/0.06 -0.1 " "
4mm/
0.16"
> 35 mm/1. 38"