Configuring Network Settings; Configuring Wired Lan Settings; Automatically Obtain Ipv4 Address Settings; Manually Configure Ipv4 Address Settings - Poly G7500 Administrator's Manual

Configuring Network Settings

Topics:
▪

Configuring Wired LAN Settings

▪ Configure Wi-Fi Settings
Network settings include the system primary (wired LAN) and secondary (Wi-Fi) network configurations.
You also can register your system with SIP and H.323 for calling.
Configuring Wired LAN Settings
You can set the wired LAN properties for your system.
Related Links
LED Status Indicators for the System LAN Ports

Automatically Obtain IPv4 Address Settings

Your system by default gets its IP address information automatically. If this behavior is turned off, you can
turn it back on.
You must have a DHCP server deployed in your environment.
Procedure
1. In the system web interface, go to Network > Primary Network > IP Addresses.
2. For IP Address, select Obtain IP address automatically.
Some of your IP address settings populate automatically and are read-only.
3. Select Save.

Manually Configure IPv4 Address Settings

You can manually specify the system's IPv4 address settings.
Procedure
1. In the system web interface, go to Network > Primary Network > IP Addresses.
2. For IP Address, select Enter IP address manually.
3. Configure the following settings:
Setting
Your IP Address is
Subnet Mask
on page 103
Description
Specifies the system IP address.
Specifies the subnet mask assigned to your
system.
35