Trim/Tilt Cylinder Installation - Volvo Penta SX-A Workshop Manual

Transom Shield Assembly

Trim/Tilt Cylinder Installation

168
Remove trim cylinder pivot pin.
5.
Remove the trim cylinder.
6.
Remove and discard trim/tilt line O-rings and retainers only if they
7.
are leaking, otherwise, leave the O-rings and retainers in the trim
cylinders.
NOTICE! New O-rings and retainers come installed on new trim
cylinders.
Coat the pivot pins with grease 828250.
1.
NOTICE! If trim cylinder bushings are damaged, replace them.
Align trim tilt cylinders with gimbal ring.
Slide pivot pin through cylinders and gimbal ring
2.
Publ. 7746477 English 06-2008