Operating Your Remote Control - Hitachi AXS100E Instruction Manual

Operating Your Remote Control

The remote control requires a CR2032, 3V Lithium battery (included).
1. Use the appropriate screw driver to unscrew
the battery compartment cover at the rear of
the remote control.
2. Pull the battery cover in the direction of the
arrow.
3. Remove the insulating mylar strip from the
battery if the battery is being used for the first
time.
4. Remove the old battery. Replace with a new
one.
5. Insert the battery cover back into the remote
control and screw the battery compartment
cover back on.
GB
11