Opm-25 Board - Sony BDX-M1000 Installation Manual

1-8-2. OPM-25 Board

F
E
S401 S400
D
S504
C
S503
S502
S501
S500
B
S1100
S1103
S1101 S900
A
S1102
1 2 3
n
. The addresses on the board are shown by ( ) marks.
. For the switches described "Factory use" or "Unas-
signed", do not change the factory settings.
S400 (D-2): Factory use
Factory setting: S400-1 to -3 : ON
S400-4
ON
( indicates the switch
lever position.)
1 2 3 4
S401 (D-1): Factory use
Factory setting: All switch levers are set to ON.
ON
( indicates the switch
lever position.)
1 2 3 4
BDX-M1000
S905-S901
S903
4 5 6 7
A side (Component side)
: OFF
S900 (A-4):
Factory setting: All switch levers are set to ON.
ON
( indicates the switch
lever position.)
1 2 3 4
S900-1 to -3: Unassigned
S900-4: Sets the description indicated on D900 and D913
(Output Status indicator).
ON: D900 and D913 (Output Status indicator)
indicate the output number of packets having
a PID (=Packet ID) set by S905, S904, S902
and S901 (PID Setting switch) in the period
of one second.
OFF: D900 and D913 (Output Status indicator)
indicate the output interval (time) of packets
having a PID (=Packet ID) set by S905,
S904, S902 and S901 (PID Setting switch).
It can be converted a hexadecimal display to
time in second (T) by the following expres-
sion:
T=HD+(LD/TD)
HD : A number that is converted a hexadeci-
mal display on D900 to a decimal.
LD : A number that is converted a hexadeci-
mal display on D913 to a decimal.
TD : 20
(Example) When D900 indicates "02", and
D913 indicates "11":
HD=2, LD=17, TD=20
T=2+(17/20)=2.85 second
S905, S904, S902, S901 (A-6, 7): PID Setting
Factory setting: All switches are set to 0.
8 8 8
4 C 4 C 4
0 0 0
S905 S904 S902
Set the PID (=Packet ID) of output packet in hexadecimal.
S905 is MSB side, and S901 is LSB side.
(Example) To set the PID at "1A7C":
S905=1, S904=A, S902=7, S901=C
1-8. Settings of Internal Switches
switch
8
C 4 C
0
S901
1-9 (E)