Settings Of Internal Switches; Ipm-81 Board - Sony BDX-M1000 Installation Manual

1-8. Settings of Internal Switches

1-8. Settings of Internal Switches

1-8-1. IPM-81 Board

H
G
F
E
D
C
B
S201
A
S101
1 2 3
n
. The addresses on the board are shown by ( ) marks.
. For the switches described "Unassigned", do not change
the factory setting.
S101 (A-2): Reset switch
n
Do not press this switch under normal conditions.
1-8 (E)
4 5 6 7
A side (Component side)
S201 (A-2):
Factory setting: All switch levers are set to OFF
(lower position).
ON
OFF
1 2 3 4 5 6
S201-1 to -4, -8 : Unassigned
S201-5 to -7 : Set the description indicated on D201 to
D203 (Status indicator).
S201-5 S201-6 S201-7
OFF OFF OFF
OFF ON OFF
ON OFF OFF
( indicates the switch
lever position.)
7 8
Description
D201 to D203 indicate the
channel that the packet is
passing through the input
filter.
D201 to D203 indicate the
channel that is set by CPU to
pass the packet through the
input filter.
D201 to D203 indicate the
channel that the input buffer
overflowed.
BDX-M1000