Table of Contents
Advertisement
Chapter 1: Alarms
1 - 3 9
A124 - Pusher Length Error
PUSHER LENGTH ERROR!
ADJUST TO PROPER
PUSHER LENGTH
A124
Description:
The Pusher Length Error alarm occurs during the setup changeover sequence if the measurment taken of the new pusher does not
correspond to a predetermined (in the software) length. This is is generally due to the incorrect assembly of the pushing rod.
Solution:
•
Verify the assembly of the pusher to the Guiding Channel Reference Chart in the Hydrobar Sprint 555 Instruction Manual.
Alarm needs to be cleared. Press the STOP key on the remote control station to clear the message and reset the alarm.
HYDROBAR SPRINT 555
Advertisement
Table of Contents
Need help?
Do you have a question about the HYDROBAR SPRINT 555 and is the answer not in the manual?
Questions and answers