Instruments And Controls; Dashboard Switch Introduction - Paccar DAF CF Driver Manual

Instruments and controls

Cleaning the safety belts
See 'Cleaning' in the chapter 'Inspections and maintenance'.
3.3 INSTRUMENTS AND CONTROLS
3

3.3.1 Dashboard switch introduction

This vehicle is equipped with so called
'MUX'- switches. These switches are
not hardwired but control functions
through data transfer.
An advantage of this type of dashboard
switches is that, on request of the
customer, a DAF Service dealer can
change their position in the dashboard.
D005162
However changing the switches from
position is limited within restrictions.
On the various panels different switch locations can be identified. For example the
instrument panel holds the locations 'A1', 'A2' and 'B'. See the pictures of the various
panels and consoles.
A location contains three rocker switches indicated with '1', '2' and '3'.
Some of the switches are equipped with a red or green indicator light.
– Red: the function is overruled/ OFF / disabled.
– Green: the function is ON / enabled.
For each of these locations the standard (ex works) position of the rocker switches is
described.
80