Activating The Truck Phone; Installing And Removing Bluetooth Enabled Telephones - Paccar DAF CF Driver Manual

3.4.2 Activating the truck phone

Placing the SIM card in the telephone interface unit
Open the fuse box.
Install the SIM card in the slot behind
the black cover.
NOTE: The correct way to
insert the SIM card is shown
on the sticker placed on the
telephone interface unit.
Close the black cover and the fuse box.
Activating the SIM card
– Use the Menu Control Switch to select the 'Phone' icon in the master display.
– Select the 'truck phone' icon.
– Select the 'Activation' icon.
– Set the truck phone to 'On'.
– Use the steering wheel switches to enter the PIN code when prompted.
The truck phone is now set to be used. An icon in the lower centre part of the instrument
panel shows the connection status of the truck phone.
The truck phone is operated using the steering wheel switches. See section 'Operating
the telephone using the steering wheel switches'.
NOTE: Entering information using the keypad on the master display is
limited. It is advisable to preprogramme the SIM card before placing it in the
telephone interface.
NOTE: Unlocking the SIM card (entering the PUK code) must be done
using a different mobile phone.

3.4.3 Installing and removing Bluetooth enabled telephones

Connecting with the vehicle telephone interface system
NOTE: It is not possible to enter the telephone setup menu using the Menu
Control Switch while driving. Telephone operation is only possible while
driving using the steering wheel switches once telephones have been paired
and are connected.
Switch the ignition to the accessory position (position A). The Bluetooth telephone must
now be paired with the telephone interface system.
Instruments and controls
3
D005122
113