Hagie STS12i Combo Manual page 62

SECTION 3 –
CAB
Machine Gauges
(Located on cab A-post)
-Typical View
Section Indicator Display
The Section Indicator Display allows you
to view system status for the following:
• (1) - Master Spray Indicator (illuminates
when ON).
• (2) - Fence Row Indicators (illuminate
when ON).
• (9) - Spray Section Indicators (illuminate
when OFF).
• (1) - Rear Wheel Nozzle Indicator (illu-
minates when ON).
• Left • Spray
• Master
Fence Section
Spray
Row
Section Indicator Display
-Typical View
Refer to the Spray Systems Section
elsewhere in this manual for further
information.
Detasseling Control Panel
The Detasseling Control Panel houses
switches which activate Depth Command,
Left/Right Fold, All-Up/Down, and
Detasseling Head Motor functions.
3-27
• Tachometer
(RPM Gauge)
• Fuel Gauge
• Engine Coolant
Gauge
• After-treatment
Gauge
• Rear
• Right
Wheel
Fence
Nozzle
Row
Refer to the Detasseling Systems Section
elsewhere in this manual for further
information.
Tasseltrol/LS System 12 Control Panel
The Tasseltrol/LS System 12 Control
Panel is used for programming the
detasseling heads.
Refer to the Detasseling Systems Section
elsewhere in this manual for further
information.
Detasseling and Tasseltrol/
LS System 12 Control Panels
-Typical View
Additional Features and
Controls
Field and Work Lights
The Field Lights (located on the front of
cab) and Work Lights (located on each boom
cradle) are for use when operating in the field
after dark and are turned on/off through the
Machine Display.
NOTE: Turn Field and Work Lights OFF
before entering a public roadway.