ZyXEL Communications EX5501-B0 User Manual page 23

Table 3 LED Descriptions (continued)
LED COLOR
INTERNET Green
Red
2.5G LAN Green
10G LAN Green
LAN1~4 Green
WIFI 2.4G Green
Amber
5G WiFi Green
Amber
EX5501-B0 / AX7501-B0 / PX7501-B0 User's Guide
Chapter 1 Introducing the Zyxel Device
STATUS DESCRIPTION
On The Zyxel Device has an IP connection but no traffic.
Your device has a WAN IP address (either static or assigned by a DHCP
server), PPP negotiation was successfully completed (if used).
Blinking The Zyxel Device is sending or receiving IP traffic.
Note: For AX7501-B0 / PX7501-B0 only.
Off There is no Internet connection or the gateway is in Bridge mode.
On The Zyxel Device attempted to make an IP connection but failed. Possible
causes are no response from a DHCP server, no PPPoE response, PPPoE
authentication failed.
Blinking The Zyxel Device has an unsupported 100 Mbps Ethernet connection on the
WAN.
Note: For EX5501-B0 only.
On The Zyxel Device has a successful 2500 Mbps Ethernet connection with a
device on the Local Area Network (LAN) via the 2.5G LAN port.
Off The Zyxel Device does not have an Ethernet connection with the LAN via
the 2.5G LAN port.
On The Zyxel Device has a successful 10/100/10000 Mbps Ethernet connection
with a device on the Local Area Network (LAN) via the 10G LAN port.
Blinking The Zyxel Device is sending or receiving data to/from the LAN at 10/100/
10000 Mbps via the 10G LAN port.
Off The Zyxel Device does not have an Ethernet connection with the LAN via
the 10G LAN port.
On The Zyxel Device has a successful 10/100 Mbps Ethernet connection with a
device on the Local Area Network (LAN) via the LAN1~4 ports.
Blinking The Zyxel Device is sending or receiving data to/from the LAN at 10/100
Mbps via the LAN1~4 ports.
Note: For AX7501-B0 / PX7501-B0 only.
Off The Zyxel Device does not have an Ethernet connection with the LAN via
the LAN1~4 ports.
On The 2.4G wireless network is activated.
Blinking The Zyxel Device is communicating with 2.4G wireless clients.
Note: For AX7501-B0 / PX7501-B0 only.
Off The 2.4G wireless network is not activated.
Blinking The Zyxel Device is setting up a WPS connection with a 2.4G wireless client.
On The 5G wireless network is activated.
Blinking The Zyxel Device is communicating with 5G wireless clients.
Note: For AX7501-B0 / PX7501-B0 only.
Off The 5G wireless network is not activated.
Blinking The Zyxel Device is setting up a WPS connection with a 5G wireless client.
23