Table of Contents
Advertisement
Sharpener Operator's Manual
FUSES
The sharpener uses two (2) fuses of differing amperage: 0.5 A and 15 A. A spare for each is
provided.
2x
0.5 A Fuse
The 0.5 A fuse is located inside the connector that is inline with the wiring harness and the 15 A
fuse is inside connector on the positive (red) battery clamp cable.
0.5 A Fuse
**Always be sure to connect the sharpener to an approved 12 V power source. Higher
voltages could waste fuses and possibly damage the machine.**
BBS-MY2020-EN: Rev A
15 A Fuse
Page
2x
15 A Fuse
26
of
52
19-May-2020
Advertisement
Table of Contents
Need help?
Do you have a question about the BANDSAW BLADE SHARPENER and is the answer not in the manual?
Questions and answers
What’s the amp draw on the blade sharpener? Looking at a 110v to 12v transformer.