Table of Contents
Advertisement
Automatic Callback
When you encounter a busy line within your CustoPAK system, a code can be
dialed which will connect you when both lines are idle. The request will remain
active for 30 minutes unless canceled. Use Automatic Callback to increase
productivity by eliminating "telephone tag" , manual callbacks and unnecessary
dialing. This feature only works within the CustoPAK system, and the system
can only accommodate one request at a time per line. This feature is not
available in the GTD-5 switch type.
To activate Automatic Callback once you've reached a busy line within
your CustoPAK system:
Press the switchhook (or the Tap/Flash/Recall/Link button, depending on your
telephone set).
Listen for dial tone.
5
2
.
*
Hang up (when the called line is idle, your line will ring with a distinctive ring).
To cancel an Automatic Callback request:
Lift handset and press
#
Listen for confirmation tone.
Hang up.
NOTES:
1.) If an Automatic Callback is not answered by the originating station, the
request will be canceled.
2.) Automatic Callback can only be active on one station at a time.
3.) An Automatic Callback request can only be activated if the called number is
in a busy condition and within the CustoPAK group.
18
5
2
.
Call Forwarding Options
Your CustoPAK system can be equipped with one or all of its five Call Forwarding
options. You may select or combine these features to meet your business needs.
The Call Forwarding options and their descriptions can be found by referring to
the list below:
Option
Call Forwarding ..................................... Selectable Features .................................. 20
Call Forwarding - Busy Line ................. Selectable Features .................................. 22
Call Forwarding - Don't Answer............ Selectable Features .................................. 23
1
1
1
Additional charges apply.
Section
Page
19
Hide quick links:
Advertisement
Table of Contents
