Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Zanussi ZUNN18FS1
Summary of Contents for Zanussi ZUNN18FS1
- Page 1 User Manual GETTING STARTED? EASY. ZUNN18FS1 EN User Manual Freezer...
-
Page 2: Safety Information
VISIT OUR WEBSITE TO: Get usage advice, brochures, trouble shooter, service and repair information: www.zanussi.com/support SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. -
Page 3: Safety Instructions
By clients in hotels, motels, bed and breakfast and other – residential type environments. To avoid contamination of food respect the following • instructions: do not open the door for long periods; – clean regularly surfaces that can come in contact with food –... - Page 4 appliance to the power supply. This is to allow the oil to flow back in the compressor. The appliance contains flammable gas, • Before carrying out any operations on the isobutane (R600a), a natural gas with a high level appliance (e.g. reversing the door), remove the of environmental compatibility.
-
Page 5: Installation
• The following spare parts will be available for 7 • Disconnect the appliance from the mains years after the model has been discontinued: supply. thermostats, temperature sensors, printed • Cut off the mains cable and discard it. circuit boards, light sources, door handles, door •... - Page 6 DIMENSIONS Overall dimensions ¹ Space required in use ² 1772 ² the height, width and depth of the appliance including the handle, plus the space necessary for free circulation of the cooling air ¹ the height, width and depth of the appliance without the handle and feet Overall space required in use ³...
-
Page 7: Ventilation Requirements
necessary to allow door opening to the minimum angle permitting removal of all internal equipment LOCATION To ensure appliance's best functionality, you should not install the appliance in the nearby of the heat source (oven, stoves, radiators, cookers or hobs) or in a place with direct sunlight. -
Page 8: Control Panel
CAUTION! Refer to the installation min. 5 cm instructions for the installation. 200 cm DOOR REVERSIBILITY Please refer to the separate document with instructions on installation and door reversal. min. CAUTION! At every stage of reversing 200 cm the door protect the floor from scratching with a durable material. -
Page 9: Drinkschill Function
SWITCHING OFF DRINKSCHILL FUNCTION 1. Press the appliance ON/OFF for 3 seconds. The DrinksChill function is to be used to set an acoustic alarm at the preferred time, useful for The display switches off. example when a recipe requires to cool down food 2. -
Page 10: Daily Use
The alarm stops after closing the door. During the If you do not press any button, the alarm, the sound can be muted by pressing any sound switches off automatically after button. around one hour to avoid disturbing. DAILY USE THAWING FREEZING FRESH FOOD Deep-frozen or frozen food, prior to being... - Page 11 • The colder the temperature setting, the higher • Do not re-freeze defrosted food. If the food has the energy consumption. defrosted, cook it, cool it down and then freeze • Ensure a good ventilation. Do not cover the ventilation grilles or holes. HINTS FOR STORAGE OF FROZEN FOOD •...
-
Page 12: Care And Cleaning
Type of food Shelf life (months) Seafood: Fatty fish (e.g. salmon, mackerel) 2 - 3 Lean fish (e.g. cod, flounder) 4 - 6 Shrimps Shucked clams and mussels 3 - 4 Cooked fish 1 - 2 Meat: Poultry 9 - 12 Beef 6 - 12 Pork... - Page 13 WHAT TO DO IF... Problem Possible cause Solution The appliance does not oper- The appliance is switched off. Switch on the appliance. ate. The mains plug is not connec- Connect the mains plug to the ted to the mains socket cor- mains socket correctly.
- Page 14 Problem Possible cause Solution The gasket is deformed or Refer to "Closing the door" dirty. section. Food products are not wrap- Wrap the food products better. ped properly. Temperature is set incorrectly. Refer to "Control Panel" chap- ter. Appliance is fully loaded and is Set a higher temperature.
- Page 15 Problem Possible cause Solution Temperature sensor problem. Contact the nearest Author- symbol is ized Service Centre (the cool- shown instead of numbers on ing system will continue to the temperature display. keep food products cold, but temperature adjustment will not be possible). 2.
-
Page 16: Technical Data
TECHNICAL DATA The technical information is situated in the rating It is also possible to find the same information in plate on the internal side of the appliance and on EPREL using the link https://eprel.ec.europa.eu the energy label. and the model name and product number that you find on the rating plate of the appliance. - Page 20 WWW.ZANUSSI.COM/SHOP...