Vitrex Powercut 800 Manual
  1. Manuals
  2. Brands
  3. Vitrex Manuals
  4. Saw
  5. Powercut 800
  6. Manual

Vitrex Powercut 800 Manual

Bridge saw
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Powercut 800
Bridge Saw
Safety First
Read manual before use.
Keep hands arms and face
clear of blade while its in
use. Always have safety
guard in place when machine
is switched on at the
mains. Always wear Vitrex
protective equipment when
using hand or power tools.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Powercut 800 and is the answer not in the manual?

Questions and answers

Related Manuals for Vitrex Powercut 800

Summary of Contents for Vitrex Powercut 800

  • Page 1 Read manual before use. Keep hands arms and face clear of blade while its in use. Always have safety guard in place when machine is switched on at the mains. Always wear Vitrex protective equipment when using hand or power tools.

  • Page 2: Table Of Contents

    Powercut 800 Bridge Saw CONTENTS SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 SAFETY .

  • Page 3: Specifications

    SAFETY they can be caught in moving parts. • Non-skid footwear is recommended when The Powercut 800 Bridge Saw is designed for working as operation creates dust. the cutting of small and moderate size ceramic • Wear protective hair covering to contain tiles, marble and granite.

  • Page 4: Specific Safety Rules

    Warning • Wear suitable protective equipment. • The use of any accessory or attachment other • Adopt a working position to the left of the than one recommended in this instruction diamond blade. manual may present a risk of personal injury. •...

  • Page 5: Assembly

    2. Be sure that the switch is in the OFF-position before connecting the machine to the mains voltage. 3. Always keep away the mains lead from moving parts of the machine. 4. Do not apply side-pressure to the saw blade. It can break the blade and cause injury.

  • Page 6: Operating

    Note: When not in use, please always make sure button (beside the On-/Off-Switch) and the bridge the cutting unit is locked at the middle of the saw can be restarted. slide rail to prevent it from rolling back and forth along the bridge.

  • Page 7: Maintenance

    5. Fix the lock nut tightly. Only use a diamond saw blade with a diameter of 200mm for Powercut 800 Bridge Saw. The bore of the blade must be 22.23mm. MAINTENANCE 1. First, to disconnect the water supply, press CAUTION! —...

  • Page 8: Trouble Shooting

    Check the pump discharge and tubing for kinks • Periodic maintenance of the bridge saw will • and obstructions. Algae build up can be flushed prevent unnecessary problems. Keep the out with a jet of water. ventilation slots of the bridge saw clean to prevent overheating of the motor.

Table of Contents