Introduction; Unpacking And Checking Carton Contents - Craftsman 113.171500 Owner's Manual

SP6723 5/3/09 9:33 PM Page 4
If the grounding instructions are not
completely understood, or if you are in
doubt as to whether the toot is properly
grounded, check with a qualified
electrician or service personnel.
WARNING: Do not permit fingers
to touch the terminals of plug when
installing or removing the plug from
the outlet.
Improper connection of the equipment
grounding conductor can result in a risk of
electric shock. The conductor with
insulation having an outer surface that is
green with or without yellow stripes is the
equipment grounding conductor. If repair
or replacement of the electric cord or plug
is necessary, do not connect the
equipment-grounding conductor to a live
terminal.
AWARNING: If not properly
grounded, this Air Blower can cause
an electric shock, particularly when
used in damp locations.
Introduction
Air Blowers are designed to move large
volumes of air. They are used to dry wet
carpets, floors and furniture. They may
also be used for ventilation.
Unpacking and Checking Carton Contents
Carefully unpack and inspect your
Air Blower. Notify your Sears store,
Sears Service Center, or call 1-800-4-MY-
HOME if any parts are damaged or
missing.
Your Air Blower comes packaged with the
retractable handle in an unlocked
position.
To Lock the Retractable Handle:
Place the Air Blower in an upright
position, on a clean, flat surface. Putt the
retractable handle up until it is fully
extended. Gently pull up on the extended
handle until you hear an audible sound of
the locking buttons, located at the bottom
of the handle, snapping into place.
Check to make sure that both buttons are
securely locked into place for safety.
You may now safely move your Air
Blower using the retractable handle.
Retractable Handle
Fully
_cking Hole (2)
Locking Button (2)
4