Subscribe to Our Youtube Channel
Related Manuals for DOEPFER MSY2
Summary of Contents for DOEPFER MSY2
- Page 1 DOEPFER MIDI TO SYNC INTERFACE MIDI TO SYNC INTERFACE MIDI TO SYNC INTERFACE MIDI TO SYNC INTERFACE MSY2 MSY2 MSY2 MSY2 User's Guide (English) www.doepfer.com...
- Page 2 MSY2. The second SYNC ouput may be left open or connected to another device controlled by the MSY2 SYNC output. Use a suitable cable for that. The pins 1, 2 and 3 must be connected! MIDI cables are unsuitable! If the SYNC socket of your device can be switched between SYNC-IN and SYNC-OUT switch it to SYNC-IN (e.g.
- Page 3 MIDI-In socket is set the MSY2 is supplied from MIDI (if the MIDI transmitter used is 100% MIDI compatible). Only one of the two jumpers is allowed to be set. Otherwise the MSY2 will be damaged! If none of the two jumpers is set the MSY2 will not work.
- Page 4 (see sketch on the MSY2 housing). If the polarity is incorrect, MSY2 will not function. However, there is no danger of damage to the circuitry since it is protected by a diode. If the MSY2 is used in Germany the external power supply must be VDE approved.
- Page 5 Clock (i.e. dividing factor 1) and increase the dividing factor if the device controlled by the MSY2 is running too fast. Pay attention that some of the devices to be controlled by MSY2 additionally enable to change the dividing factor inside the device (e.g. TR808: "prescale").
Need help?
Do you have a question about the MSY2 and is the answer not in the manual?
Questions and answers